# Lab notes

CCNA | Worked example with fictional data

Step: Practice configuration and troubleshooting
Owner: Candidate
When: Before scheduling the exam

## Gather first
- Blueprint objective and simulator or devices
- Starting topology and intended behavior
- Test commands or observations

## How to prepare it
1. Sketch nodes, interfaces, addressing and expected traffic. Save the baseline configuration before changing one element at a time.
2. Record commands and observations with the time and the expected result. Introduce a specific fault and use output to explain the root cause.
3. Save the final working configuration and a reproduction checklist. Repeat the fault in a clean lab until you can resolve it without prompts.

## Example

### Topology and goal
Two switches, hosts on VLAN 20, one trunk link. Hosts should ping across the trunk.

### Fault injected
Remove VLAN 20 from the allowed list on one side.

### Checks and observations
VLAN exists on both switches. Trunk output shows it missing on the second switch.

### Fix and verification
Restore VLAN 20 on the trunk. Hosts exchange ICMP again.

### What to repeat
Compare access-port and trunk failures in a clean lab.

## Review
Another learner can recreate the failure and check the fix from the recorded configuration and outputs.

## Handoff
Save lab notes beside the study plan and revisit unresolved errors in timed practice.

Use the current rules and any prescribed forms for your engagement.
