Start hereRoute every signal into one product safety case
~66 days leftOpen step
Guide library
Regulation North America

CPSC Section 15(b) reporting and recall operations

CPSC product safety reporting: the Section 15(b) decision, report and recall playbook

A hands-on operating guide for manufacturers, importers, distributors, retailers and brands selling consumer products in the United States. Use it to collect safety signals, make and document the reporting decision, submit a complete Section 15(b) report, and run a corrective action or recall with clear owners and evidence.

Issuing authority
U.S. Consumer Product Safety Commission (CPSC), Office of Compliance and Field Operations
Timing
CPSC describes the statutory word “immediately” as reporting within 24 hours after the firm obtains reportable information. A firm may investigate genuine uncertainty, but the handbook says that investigation should not ordinarily exceed 10 working days absent demonstrable reason. The 10-day period is not an automatic extension after a reportable conclusion: report immediately when the available information reasonably supports the duty. CPSC also says that, ordinarily, no more than five working days should pass before safety information reaches the CEO or designated reporting official. A Fast-Track firm reports the defect and may implement a recall within 20 working days. After a recall, provide monthly progress reports as directed by the negotiated plan and current portal instructions; CPSC’s checklist calls for retail notices to remain posted at least 120 days and recall information to stay on the firm website indefinitely.
Reviewed
Inside this guide
6 steps · 6 templates

Who it applies to

Section 15(b) can require a firm to report when information reasonably supports that a consumer product fails an applicable safety rule, contains a defect that could create a substantial product hazard, or creates an unreasonable risk of serious injury or death. Actual injury is not required. This guide covers the CPSA route. Check separately for Section 37 lawsuit reporting, Section 102 choking-hazard reports, other CPSC statutes, state duties, foreign reporting, incident preservation and litigation holds. Retailers and distributors have their own duties and should not assume an upstream company has discharged them.

What you’ll produce

One accountable safety case with a reliable receipt chronology; a documented reportability decision; a complete, fact-supported CPSC filing and receipt; product containment and traceability; a negotiated and tested corrective action plan when needed; accessible consumer notices; remedy, retailer and call-center operations; and monthly progress evidence through closeout.

CPSC’s FY2024 Annual Performance Report recorded 333 voluntary recalls involving 41 million units; 166 were Fast-Track recalls. CPSC reported 98.08% of Fast-Track recalls were initiated within 20 days of the firm report. That is a program-timing measure, not an acceptance or safety success rate. The same report gives a 51% average correction rate for recall cases closed in FY2024, compared with 24% in FY2023. CPSC warns this measure does not count products consumers discarded without responding, so it is not a complete measure of hazard removal. CPSC’s live recall dashboard updates weekly, while remedy data can change daily. Use these figures to set operating targets, then compare your own notification, repair, refund, replacement and disposal evidence with the correct denominator.

TEAM KICKOFF

Run the project

Go to the roadmap

Decisions for leadership

What applies to each entity, product and activity?
Have Legal or Regulatory confirm scope and applicable deadlines for each entity, activity and jurisdiction. Assign owners for incident reporting, filings and lifecycle changes where required.
Who will do the work and who can sign?
Appoint a sponsor, a day-to-day lead and a named owner for every workstream. Set aside their time and decide who can approve the outcome, accept remaining risk or authorize a filing.
Which deadlines can we promise?
Separate fixed external dates from internal targets. Confirm dependencies such as a vendor, test lab or assessor, and approve a backup plan if their dates slip.

How to spend the first week

  1. Ask the first-step owner to bring the most recent system, activity or product inventory and the contract or rule driving the work.
  2. Walk a real activity through the systems, suppliers and teams that run it. Verify the rule, authority and deadline that apply to the observed facts.
  3. Record what the sponsor approved, open questions, work owners and the next date a decision is needed. Send the brief to everyone who needs to contribute evidence.

What to review each week

Monitor obligations without a named owner, filings or notifications approaching deadline, and changes that should reopen the scope decision.

Kickoff brief to share with your team

Fill this in with your sponsor and send it to the people who own the work.

CPSC Section 15(b) reporting and recall operations kickoff brief
Business reason and required outcome  [Contract, obligation or approval]
Scope and exclusions  [Entities, systems or activities, and reasons]
Fixed deadlines and internal milestones  [Date, source and owner]
Executive sponsor and authorized signer  [Names]
Project lead and backup  [Names]
First workstream  Route every signal into one product safety case · Product safety lead + Customer care + Quality + Legal + Retailer operations [Name and due date]
People, effort and external costs  [Estimate, owner and contingency]
Evidence folder and reviewer access  [Location, access owner and review date]
Decisions and blockers  [Item, options, owner and decision date]

First week
1. Ask the first-step owner to bring the most recent system, activity or product inventory and the contract or rule driving the work.
2. Walk a real activity through the systems, suppliers and teams that run it. Verify the rule, authority and deadline that apply to the observed facts.
3. Record what the sponsor approved, open questions, work owners and the next date a decision is needed. Send the brief to everyone who needs to contribute evidence.
How to hand off evidence
  1. Record the requirement or claim, the person responsible, the period and the result. Link to the original report, configuration, test or case record.
  2. Include the version, system or product, date, and how you gathered the record. When a report covers a group of items, retain its filters and reconcile the count to the source.
  3. Ask the reviewer to open the evidence and reproduce the key check. Record their decision and date. Keep missing items or failures visible with an owner, a due date and a retest when needed.
  4. Share through the agreed channel. Keep sensitive originals in a restricted location and link any redacted copies to the corresponding originals.
BEFORE YOU START

How this works in practice

Two questions to check scope

  • Can every channel that receives safety signals, including customer care, warranty, field service, retailers, import partners and engineers, route them to a named safety owner the same day?
  • Can the company identify affected lots and customers, stop further distribution, test the remedy, and fund a return, repair or replacement before announcing a recall?

Worked scenario

A retailer sends the importer three videos showing a children’s desk chair collapsing. Customer care has also logged a near miss, while quality has a returned sample. The safety lead opens a restricted case, preserves original files and timestamps, stops shipment of the suspected lots, and asks Data Operations for a traceable sales and inventory population. Engineering tests the failure mode and checks related models. Legal and Regulatory determine whether the available facts reasonably support a Section 15(b) report, identify the earliest date the responsible firm obtained reportable information, and calendar the immediate filing deadline. The company submits the initial report with known facts and a dated list of unresolved fields rather than waiting for a perfect investigation. CPSC staff and the firm agree on a corrective action plan: retailer stop-sale, public notice, refund or replacement, direct customer outreach, a staffed help line and monthly progress reporting. Operations reconcile returned units, refunds, replacement shipments, web form claims and retailer inventory against the known population. The safety committee keeps the case open until the remaining exposure, remedy gaps and required progress reports are resolved.

DATES AND TRIGGERS

Official milestones

See the deadline calendar
  • Immediately when reportable information is obtained; CPSC describes this as within 24 hours

    Submit the Section 15(b) report

    Use the actual date and time the responsible firm obtained reportable information. Do not wait for proof of injury, final root cause or a perfect data set.

    Official reference (opens in a new tab)
  • Ordinarily no more than 5 working days for internal escalation

    Get safety information to the CEO or designated reporting official

    CPSC’s handbook describes this as the ordinary maximum for information to reach the responsible executive. Build same-day escalation into the company process.

    Official reference (opens in a new tab)
  • Ordinarily no more than 10 working days for a genuine reportability investigation

    Resolve the uncertain reporting question or report

    This is not a guaranteed extension. The firm must act reasonably and expeditiously, and report immediately once available information reasonably supports reporting.

    Official reference (opens in a new tab)
  • Within 20 working days for a Fast-Track recall

    Implement the agreed recall after the report

    Coordinate the corrective action plan and launch details with CPSC staff; this is a program path, not an agency endorsement of product safety.

    Official reference (opens in a new tab)
  • Monthly while required by the corrective action plan

    Submit progress on the remedy and consumer response

    Use current portal instructions and CPSC staff direction. Tie every count to a dated source and reconcile it before filing.

    Official reference (opens in a new tab)
  • At least 120 days for retail posters; recall website information indefinitely

    Maintain visible notices

    Follow the specific CAP and CPSC direction if it calls for longer or additional notice channels.

    Official reference (opens in a new tab)
The whole journeyabout 66 days across 6 steps
  1. 01Route every signal into one product safety case, Product safety lead + Customer care + Quality + Legal + Retailer operations, about 2 days
  2. 02Build a defensible reportability and affected-product assessment, Product safety committee + Engineering + Data Operations + Regulatory counsel, about 3 days
  3. 03Prepare, review and file the initial CPSC report, Regulatory filing owner + Product safety lead + Legal + Authorized company officer, about 1 days
  4. 04Contain product and agree a corrective action plan, Recall director + Supply chain + Retailer and marketplace operations + Engineering + Finance + Legal + CPSC case contact, about 10 days
  5. 05Launch notices and make the remedy easy to complete, Communications + Customer experience + Retailer operations + Digital product + Privacy + Legal, about 20 days
  6. 06Measure effectiveness, report progress and close with proof, Campaign data owner + Finance + Retailer operations + Customer care + Internal audit + Executive sponsor, about 30 days
IMPLEMENTATION ROADMAP

Step by step

Checklist, instructions and 6 templates.

View plan as a table
Project roadmap with current target dates and completion status
StepOwnerWhen to actEstimated targetDeliverablesStatus
Route every signal into one product safety caseProduct safety lead + Customer care + Quality + Legal + Retailer operationsSame business day; preserve the actual receipt time and the first date a responsible employee could appreciate the safety significanceSet a start dateSafety signal intake and evidence chronologyOpen
Build a defensible reportability and affected-product assessmentProduct safety committee + Engineering + Data Operations + Regulatory counselBegin immediately; report within 24 hours once reportable information is obtained. If the duty is genuinely uncertain, any investigation should be reasonable and expeditious, ordinarily no more than 10 working days unless facts justify longer.Set a start dateReportability decision memo and population workbookOpen
Prepare, review and file the initial CPSC reportRegulatory filing owner + Product safety lead + Legal + Authorized company officerImmediately, interpreted by CPSC as within 24 hours after reportable information is obtained; file through the Business portal at SaferProducts.gov or use the current CPSC alternative channelSet a start dateSubmitted Section 15(b) report, evidence index and receiptOpen
Contain product and agree a corrective action planRecall director + Supply chain + Retailer and marketplace operations + Engineering + Finance + Legal + CPSC case contactStart immediately when a hazard is credible; agree the CAP and dates with CPSC staff before public release where practicableSet a start dateCPSC-coordinated corrective action plan and tested remedy fileOpen
Launch notices and make the remedy easy to completeCommunications + Customer experience + Retailer operations + Digital product + Privacy + LegalRelease only when CPSC coordination and remedy readiness allow; set channel-by-channel dates and monitor dailySet a start dateReleased recall communication pack and customer response operationOpen
Measure effectiveness, report progress and close with proofCampaign data owner + Finance + Retailer operations + Customer care + Internal audit + Executive sponsorMonthly progress reports on the schedule and format CPSC directs; maintain the public notice indefinitely and do not close while required agency reporting or material exposure remainsSet a start dateMonthly Progress Report reconciliation and recall closeout memoOpen
0 of 6 completeOpen workspace

Targets use illustrative calendar-day estimates and assume the steps run in sequence. Check official dates and agree real durations with your team.

  1. 01

    Route every signal into one product safety case

    Who Product safety lead + Customer care + Quality + Legal + Retailer operations When Same business day; preserve the actual receipt time and the first date a responsible employee could appreciate the safety significance

    Open a restricted case ID. Preserve original complaints, images, returned product, warranty claims, repair data, lawsuits, test results, supplier communications and retailer notices. Record event date, date received by each business unit, product identifiers, lot and date codes, injuries or near misses, severity, frequency, use conditions and interim action. Link duplicates without deleting originals. Include information from outside the United States when it concerns the same product. Assign a case owner and two clocks: information escalation to the CEO or designated officer, and the potential reporting clock. Put a shipment hold and retailer stop-sale question to the decision owner immediately when exposure may continue.

    What to produce

    Safety signal intake and evidence chronologyRestricted product-safety case log

    Gather first

    • Consumer complaints
    • Near-miss and injury reports
    • Returns and warranty data
    • Retailer and marketplace notices
    • Engineering tests
    • Supplier communications

    How to prepare it

    1. Open one controlled case ID and record product name, model, SKU, lot, serial and date-code identifiers. Preserve the original signal and log both event date and the time each firm function received it.
    2. Capture injuries, near misses, use conditions, severity, frequency, reporter, source system, affected market, interim steps, evidence custodian and legal hold. Link duplicate complaints without deleting source records.
    3. Route the signal to the safety lead and designated executive the same day. Record when an employee who could appreciate its safety significance first received it; do not substitute the later committee meeting date.

    Worked example

    Fictional details. Use the same fields with evidence from your work.

    Fictional intake row
    Retailer quality reports two desk-chair collapses on 8 June. The importer received the report at 10:14 Pacific on 9 June. One incident has a bruise, the other is a near miss. The original retailer email, two images and returned-chair tracking number are attached.
    Fictional escalation
    Warranty has four similar complaints under a different SKU. The case owner links them to the same suspected frame lot and preserves the separate source and receipt timestamps.

    Check before handing it over

    The chronology allows an independent reviewer to reconstruct what each firm knew, when it knew it and what action followed.

    Send the case ID, first-knowledge time and evidence index to the reportability decision team.

  2. 02

    Build a defensible reportability and affected-product assessment

    Who Product safety committee + Engineering + Data Operations + Regulatory counsel When Begin immediately; report within 24 hours once reportable information is obtained. If the duty is genuinely uncertain, any investigation should be reasonable and expeditious, ordinarily no more than 10 working days unless facts justify longer.

    Test each statutory basis separately: applicable safety-rule noncompliance; a defect that could create a substantial product hazard; and unreasonable risk of serious injury or death. State the evidence for and against each basis. Injury is not a prerequisite. Identify the product population by SKU, model, lot, serial or date code; join manufacturing, import, shipment, retailer and direct-sale data; document exclusions, duplicates, missing records and uncertainty. Analyze the severity and probability of harm, exposure, vulnerable users, foreseeable use and whether a defect could cause serious injury even if incidents are few. Check related models and suppliers. A second reviewer must reproduce the population and challenge the conclusion. Record the actual company knowledge date. Do not reset it to the committee meeting or wait for certainty.

    What to produce

    Reportability decision memo and population workbookDecision memo and reproducible data workbook

    Gather first

    • Chronology
    • Product safety rules
    • Injury and near-miss evidence
    • Test data
    • Bills of material
    • Lot genealogy
    • Manufacturing, import and sales records

    How to prepare it

    1. Evaluate noncompliance, a defect that could create a substantial product hazard, and unreasonable risk of serious injury or death as separate questions. Record supporting and contradictory evidence, severity, likelihood, use and exposure.
    2. Build the potentially affected population from versioned queries. Reconcile units made, imported, sold, in transit, in company warehouses, at distributors, at retail and in consumer hands. Document join logic, missing identifiers, excluded units and confidence limits.
    3. Have an independent engineer reproduce the sample and population. Record the decision owner, legal review, actual knowledge date, filing deadline, unresolved fields and next decision time. Injury need not already have occurred.

    Worked example

    Fictional details. Use the same fields with evidence from your work.

    Fictional population
    The first query returns 42,800 chairs. A supplier heat-treatment change narrows one component lot to 8,200 units, but 1,140 units lack traceable lot data. The workbook keeps the broad population, refined query, missing-unit treatment and second reviewer’s reproducible checks.
    Fictional legal analysis
    Three collapse reports and a failed load test are assessed against potential serious injury. The memo explains why the company reports while final root cause remains open.

    Check before handing it over

    The reporting decision and affected-unit estimate can be reproduced from preserved source data rather than recollection.

    Provide the signed decision memo and frozen population extract to the CPSC filing owner.

  3. 03

    Prepare, review and file the initial CPSC report

    Who Regulatory filing owner + Product safety lead + Legal + Authorized company officer When Immediately, interpreted by CPSC as within 24 hours after reportable information is obtained; file through the Business portal at SaferProducts.gov or use the current CPSC alternative channel

    Use the CPSC business reporting workflow. Complete general information, filing firm and related entities, product detail, incident information, distribution and corrective actions already taken, attachments, review and submission. State the brand, model, dates of manufacture, product description, defect or noncompliance, known incidents, injury details, number sold, where and when sold, supply chain, firm contacts and actions underway. Attach test reports, engineering records, incident support and relevant documents. For an unknown required field, explain why it is unknown and when the firm expects to obtain it. Save a PDF of the exact report before submission, submit, capture the confirmation screen and receipt, then maintain a versioned supplement log. Clearly mark a confidentiality request at submission where appropriate and separate confidential business information from public-facing recall copy.

    What to produce

    Submitted Section 15(b) report, evidence index and receiptFiling packet and submission record

    Gather first

    • Approved reporting analysis
    • Legal entity and related firms
    • Product identifiers
    • Incident chronology
    • Population and distribution
    • Tests and engineering records

    How to prepare it

    1. Complete the CPSC Business portal sections for general information, filing firm and related entities, product details, incidents, distribution, attachments, review and submission. Use the current portal fields and distinguish manufacturer, importer, distributor and retailer roles.
    2. For each unknown field, state why it is unknown, the accountable owner and when it is expected. Attach test reports, incident support, engineering documents and related evidence. Flag information claimed confidential at submission and separate it from consumer-facing notice materials.
    3. Have Regulatory and Legal compare the final PDF against the approved facts, submit, save the exact version and receipt, and open a supplemental-information tracker. Record every later CPSC request, response owner and due date.

    Worked example

    Fictional details. Use the same fields with evidence from your work.

    Fictional open field
    The sales estimate is preliminary because two marketplace exports are pending. The report states the current estimate, identifies the source gap and assigns Marketplace Operations a specific retrieval date.
    Fictional receipt row
    The filing owner stores the portal confirmation, PDF checksum, submitted timestamp, case ID, executive approver and next CPSC contact date in the restricted case record.

    Check before handing it over

    The company can show what it submitted, what remained open, who authorized the report and how each subsequent fact was handled.

    Give the submission receipt and open-field tracker to the recall director and executive sponsor.

  4. 04

    Contain product and agree a corrective action plan

    Who Recall director + Supply chain + Retailer and marketplace operations + Engineering + Finance + Legal + CPSC case contact When Start immediately when a hazard is credible; agree the CAP and dates with CPSC staff before public release where practicable

    Block production and shipment; quarantine company inventory; tell warehouses, distributors, retailers and marketplace partners exactly which identifiers to stop selling and how to isolate them. Reconcile units made, imported, shipped, sold, in inventory and in transit. Test the proposed repair or replacement under realistic and misuse conditions. Select remedy options that customers can actually obtain, such as refund, repair or replacement, and fund reverse logistics, call-center staffing, retailer labor, shipping and replacement stock. Draft the CAP with hazard description, affected-product identifiers, immediate precautions, remedy, channels, notice text, responsible owners, release date, effectiveness checks, monthly report fields and escalation thresholds. In Fast Track, the firm may implement a recall within 20 working days after reporting; do not imply agency approval is a safety finding or skip coordination with CPSC staff.

    What to produce

    CPSC-coordinated corrective action plan and tested remedy fileCorrective action plan and operational readiness pack

    Gather first

    • Affected-unit reconciliation
    • Stop-sale confirmations
    • Remedy engineering validation
    • Consumer remedy economics
    • Retailer and supplier contacts
    • CPSC staff direction

    How to prepare it

    1. Contain the risk: stop production and shipment, quarantine inventory, issue a precise stop-sale, and reconcile in-transit units. Keep evidence of each retailer, distributor, marketplace and warehouse acknowledgement.
    2. Compare refund, repair and replacement options for safety effectiveness, customer effort, supply, geography, accessibility, cost and completion time. Test the remedy under foreseeable use and document failure criteria and retest results.
    3. Draft the CAP with hazard, affected products, consumer precautions, remedy, communication channels, owners, dates, customer support, effectiveness measures and monthly progress fields. Coordinate public launch details with CPSC staff. For Fast Track, report and be prepared to implement the recall within 20 working days; do not describe program participation as a CPSC safety finding.

    Worked example

    Fictional details. Use the same fields with evidence from your work.

    Fictional remedy gate
    A replacement support passes repeated load and misuse testing. Supply Chain confirms stock and regional delivery dates; Customer Care confirms staffing and refund authority before the launch gate is signed.
    Fictional stop-sale tracker
    Each retailer row records contact, affected SKU list, inventory count, hold acknowledgement, in-transit resolution and next verification date.

    Check before handing it over

    The firm can stop additional sales and offer a tested, funded remedy that customers and retailers can complete.

    Obtain cross-functional and CPSC coordination before releasing public notices.

  5. 05

    Launch notices and make the remedy easy to complete

    Who Communications + Customer experience + Retailer operations + Digital product + Privacy + Legal When Release only when CPSC coordination and remedy readiness allow; set channel-by-channel dates and monitor daily

    Write a plain-language notice that names the product and identifying marks, explains the hazard and injury risk, tells people to stop use or take other immediate precautions, and gives a direct path to a free remedy. Publish a durable recall landing page, homepage link, FAQ, customer-service script, retailer notice, point-of-sale removal instructions, social posts and accessible translations for the affected audience. Provide email, SMS, direct mail, retailer data matching and marketplace outreach where lawful and available. Do not collect more consumer data than needed; route images and contact data to an access-controlled case system. Test the notice on a person unfamiliar with the issue: can they identify the product, understand the risk and start a remedy without calling for clarification? Keep retailer notices and posters up for at least 120 days where the CPSC checklist calls for it, keep recall details online indefinitely, and reconcile every channel to a daily communication log.

    What to produce

    Released recall communication pack and customer response operationConsumer notice and service launch kit

    Gather first

    • Approved CAP
    • Product images and identifiers
    • Plain-language hazard statement
    • Remedy instructions
    • Retailer data
    • Customer support capacity
    • Privacy review

    How to prepare it

    1. Create consistent copy for CPSC recall notice, firm landing page, homepage link, email, direct mail, SMS where lawful, retailer notice, marketplace page, social posts, FAQ and customer-service script.
    2. Lead with the product identifiers, hazard and what to do now. Explain where identifiers appear, who is affected, how to obtain the free remedy, what proof is needed, how long it takes and a staffed contact route. Offer accessible and audience-appropriate versions.
    3. Before release, have a person unfamiliar with the product test whether they can recognize it, understand the risk and complete the remedy without help. Keep the website information indefinitely and retail posters for at least 120 days where applicable; record exceptions and longer CAP commitments.

    Worked example

    Fictional details. Use the same fields with evidence from your work.

    Fictional notice test
    A customer sees the chair model and date code in a photograph, understands to stop using it immediately, and completes the replacement request in under four minutes without a receipt.
    Fictional channel ledger
    The release log ties each email batch, retailer bulletin, web page, post and call-center script to an approved version, launch time, audience and delivery evidence.

    Check before handing it over

    Customers can identify the hazard, take the immediate safety step and request an effective remedy through more than one reliable channel.

    Use the channel ledger to reconcile reach and remedy activity in the monthly progress report.

  6. 06

    Measure effectiveness, report progress and close with proof

    Who Campaign data owner + Finance + Retailer operations + Customer care + Internal audit + Executive sponsor When Monthly progress reports on the schedule and format CPSC directs; maintain the public notice indefinitely and do not close while required agency reporting or material exposure remains

    Build a denominator from reconciled units produced or imported and explain every exclusion. Report units in consumer hands, units returned, repaired, replaced or refunded, retailer and warehouse inventory removed, customer responses, unreachable owners, returned mail, call volume, remedy stockouts, complaints, new incidents, foreign actions and corrective action taken. Separate completed remedies from notice impressions, clicks or survey responses. Compare direct-notice delivery with actual remedy completion. Use CPSC’s requested Monthly Progress Report fields and portal due dates; validate numbers to returns, refunds, repair orders, replacement shipments and retailer confirmations before sign-off. Escalate missed remedy targets, new incidents, ineffective notices or inaccessible replacement supply to the safety committee and CPSC contact. Keep a closeout memo with residual risk, final inventory disposition, records custodian, product redesign validation, CAP obligations and the owner of indefinite web content.

    What to produce

    Monthly Progress Report reconciliation and recall closeout memoMonthly reporting and closeout record

    Gather first

    • CPSC CAP reporting instructions
    • Unit population
    • Refund and repair transactions
    • Replacement shipments
    • Retailer returns
    • Customer-care records
    • Notice delivery results

    How to prepare it

    1. Reconcile the denominator and explain units made, imported, sold, held, returned, repaired, replaced, refunded, destroyed, exported or not traceable. Use a fixed data date and retain the query and source extracts.
    2. Separate notices delivered, emails opened, page views, calls and remedy completions. Calculate completion using a clearly stated denominator and document consumer-discard limitations rather than presenting a raw response rate as complete hazard removal.
    3. Submit CPSC’s requested monthly fields on the CAP schedule. Tie each number to refund ledgers, repair orders, replacement shipments, retailer confirmations and complaint feeds. Escalate incidents, stockouts, returned mail and missed targets; close only after required reports, residual exposure, records owners and CAP commitments are addressed.

    Worked example

    Fictional details. Use the same fields with evidence from your work.

    Fictional monthly row
    Of 8,200 potentially affected chairs, 1,500 are verified in retailer warehouses, 2,000 replacement offers were delivered, 740 remedies are complete, 58 mailers returned and 15 units cannot yet be matched to a lot. The report gives each count’s source and remedy gap.
    Metric context
    CPSC’s FY2024 closed-case average correction rate was 51%; the agency says this does not count products consumers may have discarded without responding. It is a reference point, not a pass/fail target for this fictional campaign.

    Check before handing it over

    The executive sponsor sees both the reported metric and the remaining consumer exposure, with an auditable path to each figure.

    Submit the approved report and retain the portal receipt, reconciliation and closeout approval.

PRIMARY REFERENCES

Official sources

How we build these guides

Keyboard shortcuts

⌘K or /
Search everything
?
This list
g h
Home
g l
Guide library
g f
Find my path
g t
Templates
g p
Playbooks
g w
My workspace
g d
Deadline calendar
g c
Regulatory changes