Start hereConfirm the filing route and decision owners
~37 days leftOpen step
Guide library
Certification North America

EPA DfE disinfectant certification

EPA Design for the Environment logo for registered disinfectants

Coordinate the two EPA reviews needed for a DfE logo, plan the registration or amendment, and verify that the final label and listing match the marketed product.

Issuing authority
U.S. Environmental Protection Agency (EPA), Office of Pollution Prevention and Toxics and Office of Pesticide Programs
Timing
EPA’s new-certification diagram gives up to eight weeks for its prevention and toxics review for qualifying submissions after third-party review. EPA FY 2027 tables list four months and $5,767 for M011, the qualifying logo-only amendment, and five months and $8,074 for A460 when that category applies. Confirm the code and timing with the Antimicrobials Division and budget profiler work separately.
Reviewed
Inside this guide
4 steps · 4 templates

Who it applies to

Antimicrobial pesticide registrants seeking the voluntary DfE logo. EPA reviews eligibility under its DfE standard and separately decides the pesticide registration or amended label. Confirm whether the filing covers an existing registration, a new product or a previously certified product updating its logo.

What you’ll produce

A documented DfE assessment, EPA registration or amendment decision for the right product, controlled label and evidence of public listing when available.

EPA’s registrant overview and current fiscal-year fee tables quote different amounts. Use the fiscal-year table for the expected filing date and confirm the actual category before paying. The EPA certified-products directory identifies qualifying registrations. Check the number against the final accepted label, including any separately marketed versions.

TEAM KICKOFF

Run the project

Go to the roadmap

Decisions for leadership

What do we need the certification to cover?
Confirm the applicable edition, sites, products or service boundary and the certification route. Budget for assessment, changes needed to pass, and maintaining certification.
Who will do the work and who can sign?
Appoint a sponsor, a day-to-day lead and a named owner for every workstream. Set aside their time and decide who can approve the outcome, accept remaining risk or authorize a filing.
Which deadlines can we promise?
Separate fixed external dates from internal targets. Confirm dependencies such as a vendor, test lab or assessor, and approve a backup plan if their dates slip.

How to spend the first week

  1. Ask the first-step owner to bring the most recent system, activity or product inventory and the contract or rule driving the work.
  2. Ask the appropriate assessor or program contact what scope they will review, what evidence they need, and which dates and fees they can confirm in writing.
  3. Record what the sponsor approved, open questions, work owners and the next date a decision is needed. Send the brief to everyone who needs to contribute evidence.

What to review each week

Monitor unresolved scope questions, controls without evidence, findings that need a retest and the next assessment or renewal date.

Kickoff brief to share with your team

Fill this in with your sponsor and send it to the people who own the work.

EPA DfE disinfectant certification kickoff brief
Business reason and required outcome  [Contract, obligation or approval]
Scope and exclusions  [Entities, systems or activities, and reasons]
Fixed deadlines and internal milestones  [Date, source and owner]
Executive sponsor and authorized signer  [Names]
Project lead and backup  [Names]
First workstream  Confirm the filing route and decision owners · Pesticide regulatory affairs + counsel + product owner [Name and due date]
People, effort and external costs  [Estimate, owner and contingency]
Evidence folder and reviewer access  [Location, access owner and review date]
Decisions and blockers  [Item, options, owner and decision date]

First week
1. Ask the first-step owner to bring the most recent system, activity or product inventory and the contract or rule driving the work.
2. Ask the appropriate assessor or program contact what scope they will review, what evidence they need, and which dates and fees they can confirm in writing.
3. Record what the sponsor approved, open questions, work owners and the next date a decision is needed. Send the brief to everyone who needs to contribute evidence.
How to hand off evidence
  1. Record the requirement or claim, the person responsible, the period and the result. Link to the original report, configuration, test or case record.
  2. Include the version, system or product, date, and how you gathered the record. When a report covers a group of items, retain its filters and reconcile the count to the source.
  3. Ask the reviewer to open the evidence and reproduce the key check. Record their decision and date. Keep missing items or failures visible with an owner, a due date and a retest when needed.
  4. Share through the agreed channel. Keep sensitive originals in a restricted location and link any redacted copies to the corresponding originals.
BEFORE YOU START

How this works in practice

Two questions to check scope

  • Does the exact product already have an EPA registration?
  • Does the filing also change the label beyond adding the logo?
  • Which document establishes when the logo can appear on packaging?

Worked scenario

A registrant with an existing disinfectant label wants to add the DfE logo. A proposed artwork revision also changes other text. The regulatory owner flags the extra changes, asks EPA to confirm the correct route, and releases artwork only after reviewing the accepted label and approval.

What to read next

  • EPA Safer Choice

    Compare the separate Safer Choice route for eligible cleaning products.

DATES AND TRIGGERS

Official milestones

See the deadline calendar
The whole journeyabout 37 days across 4 steps
  1. 01Confirm the filing route and decision owners, Pesticide regulatory affairs + counsel + product owner, about 6 days
  2. 02Coordinate independent and EPA criteria review, Registrant + qualified profiler + EPA prevention and toxics contacts, about 15 days
  3. 03Submit and reconcile the registration or amendment, Authorized applicant + Antimicrobials Division contact, about 10 days
  4. 04Release labeling and verify continued coverage, Labeling owner + legal + quality assurance, about 6 days
IMPLEMENTATION ROADMAP

Step by step

Checklist, instructions and 4 templates.

View plan as a table
Project roadmap with current target dates and completion status
StepOwnerWhen to actEstimated targetDeliverablesStatus
Confirm the filing route and decision ownersPesticide regulatory affairs + counsel + product ownerBefore paying fees or committing a launch dateSet a start dateRegistration route and fee memoOpen
Coordinate independent and EPA criteria reviewRegistrant + qualified profiler + EPA prevention and toxics contactsBefore the registration submission unless concurrent review is coordinatedSet a start dateDfE criteria review dossierOpen
Submit and reconcile the registration or amendmentAuthorized applicant + Antimicrobials Division contactAfter criteria review or under the agreed concurrent processSet a start dateRegistration filing and label decision logOpen
Release labeling and verify continued coverageLabeling owner + legal + quality assuranceBefore artwork release and when product or claims changeSet a start dateArtwork release and listing checkOpen
0 of 4 completeOpen workspace

Targets use illustrative calendar-day estimates and assume the steps run in sequence. Check official dates and agree real durations with your team.

  1. 01

    Confirm the filing route and decision owners

    Who Pesticide regulatory affairs + counsel + product owner When Before paying fees or committing a launch date

    Record the current registration number, accepted label and proposed changes. Determine the EPA review sequence and confirm the applicable PRIA category and budget directly with EPA.

    What to produce

    Registration route and fee memoFiling decision memo and cost worksheet

    Gather first

    • Existing EPA registration
    • Accepted product label
    • Proposed artwork
    • Current PRIA tables
    • EPA correspondence

    How to prepare it

    1. List the registration number or new product project ID, label version and proposed changes. Separate the logo request from other changes.
    2. Confirm the expected action code and review sequence with the EPA contact. Record the fiscal year, listed fee, assumptions and separate profiler cost.
    3. Assign the product manager and decision date. Record restrictions on printing or marketing before approval.

    Worked example

    Fictional details. Use the same fields with evidence from your work.

    Worked amendment example
    An existing registration needs a logo-only change. The reviewer references FY 2027 M011 as the budget assumption and stores EPA confirmation of the final route.

    Check before handing it over

    The filing route and quoted fee link to a current authority and the actual proposed change.

    Send the approved scope and budget to the applicant.

  2. 02

    Coordinate independent and EPA criteria review

    Who Registrant + qualified profiler + EPA prevention and toxics contacts When Before the registration submission unless concurrent review is coordinated

    Create a document index and confirm which files go to the qualified reviewer and EPA. Track restricted files, receipt, findings and the final eligibility decision for the scoped product.

    What to produce

    DfE criteria review dossierDocument index and confidential review tracker

    Gather first

    • EPA guidance
    • Product registration record
    • Scoped product documents
    • Profiler instructions
    • Review correspondence

    How to prepare it

    1. Build a list of required files and the approval or revision date for each. Flag files that need restricted handling.
    2. Have authorized owners route documents to the profiler or EPA. Record who received each version and which questions remain open.
    3. Attach the final assessment correspondence. Verify its product identity before the registration filing proceeds.

    Worked example

    Fictional details. Use the same fields with evidence from your work.

    Worked review example
    The third-party reviewer confirms receipt of all controlled documents and asks for the matching label revision. The applicant links the corrected version and records the disposition.

    Check before handing it over

    The product version and review outcome can be traced without copying confidential files into public materials.

    Give the applicant the accepted review record and approved index.

  3. 03

    Submit and reconcile the registration or amendment

    Who Authorized applicant + Antimicrobials Division contact When After criteria review or under the agreed concurrent process

    Use the approved portal and current category. Reconcile the evidence index, fee receipt, proposed label and review correspondence to the registration record. Resolve label differences and obtain the accepted label.

    What to produce

    Registration filing and label decision logSubmission checklist and regulatory correspondence log

    Gather first

    • Confirmed action category
    • EPA criteria review outcome
    • Fee receipt
    • Proposed label
    • Portal instructions

    How to prepare it

    1. Confirm how the file should be submitted. Match the filing reference, fee receipt and supporting evidence to the same product.
    2. Record dates for receipt, completeness questions and responses. Keep a version history for revised artwork.
    3. Save the official decision and accepted label. Compare it to the legal product identity and record any conditions.

    Worked example

    Fictional details. Use the same fields with evidence from your work.

    Worked decision example
    EPA sends a draft accepted label with a changed logo placement. Regulatory affairs approves the revision before retaining the stamped label and handing it to artwork control.

    Check before handing it over

    The released label can be traced to the actual EPA decision and filing record.

    Give the final label to quality, artwork control and the product owner.

  4. 04

    Release labeling and verify continued coverage

    Who Labeling owner + legal + quality assurance When Before artwork release and when product or claims change

    Compare artwork and product identity to the accepted label, registration and applicable DfE terms. Record state registration checks where applicable, public listing status, change triggers and the owner of the next review.

    What to produce

    Artwork release and listing checkLabel verification checklist and change log

    Gather first

    • Accepted EPA label
    • Final print proof
    • EPA product directory
    • State registration file
    • Change procedure

    How to prepare it

    1. Compare the approved artwork and product numbering to the accepted label. Document the exact versions and the review date.
    2. Check the EPA public listing against the registration and record any mismatch. Have regulatory affairs resolve differences with the responsible agency.
    3. Record state and distribution checks as applicable. Set the trigger and owner for future label, product or distributor changes.

    Worked example

    Fictional details. Use the same fields with evidence from your work.

    Worked release example
    The public listing matches the basic registration, but a distributor asks for its own packaging proof. Regulatory affairs holds that proof until the distributor status and label are confirmed.

    Check before handing it over

    The exact marketed product and artwork have a traceable release decision.

    Store the approved proof in the label system and update the change register.

PRIMARY REFERENCES

Official sources

How we build these guides

Keyboard shortcuts

⌘K or /
Search everything
?
This list
g h
Home
g l
Guide library
g f
Find my path
g t
Templates
g p
Playbooks
g w
My workspace
g d
Deadline calendar
g c
Regulatory changes