Start hereTurn the exam outline into a topic map
~63 days leftOpen step
Guide library
Credential Global

ISC2 Certified in Cybersecurity

Certified in Cybersecurity (CC) examination and certification

Start a cybersecurity credential with a study plan based on the current exam outline.

Who it applies to

Individuals building entry-level cybersecurity knowledge. ISC2 does not require work experience for CC.

What you’ll produce

The CC credential after passing and completing ISC2’s current certification requirements.

Use the exam outline active on your test date. A training course completion and the credential are separate records.

Check the published exam fees
BEFORE YOU START

How this works in practice

Two questions to check scope

  • Can you explain the difference between a control, a risk and a response decision using a real example?
  • Which exam objectives are unfamiliar enough to need practice before booking?

Worked scenario

A support technician can configure account access but is less familiar with incident escalation. They use the outline to assign two weeks to response and continuity, then rehearse reporting an unusual sign-in with a timed scenario.

What to read next

  • CISSP

    Check the later-career credential and experience requirements when relevant.

The whole journeyabout 63 days across 4 steps
  1. 01Turn the exam outline into a topic mapCandidate · ~7 days
  2. 02Practice decisions and explain them aloudCandidate + study partner · ~35 days
  3. 03Book, sit and complete certificationCandidate + exam provider · ~14 days
  4. 04Record renewal obligationsCredential holder · ~7 days
IMPLEMENTATION ROADMAP

Step by step

Checklist, instructions and 9 templates.

View plan as a table
Project roadmap with current target dates and completion status
StepOwnerWhen to actEstimated targetDeliverablesStatus
Turn the exam outline into a topic mapCandidateBefore spending money on prepSet a start dateSkills baseline; Study planOpen
Practice decisions and explain them aloudCandidate + study partnerDuring preparationSet a start datePractice results; Review listOpen
Book, sit and complete certificationCandidate + exam providerWhen ready and after passingSet a start dateExam booking; Score report; Credential recordOpen
Record renewal obligationsCredential holderAfter the credential is issuedSet a start dateContinuing education record; Renewal reminderOpen
0 of 4 completeOpen workspace

Targets use illustrative calendar-day estimates and assume the steps run in sequence. Check official dates and agree real durations with your team.

  1. 01

    Turn the exam outline into a topic map

    Who Candidate When Before spending money on prep

    Read the active outline. Score each domain using a short practice scenario and identify unfamiliar terms.

    What to produce

    Skills baselineSpreadsheet

    Gather first

    • Issuer’s current blueprint, experience or renewal rules
    • Real role history or completed activities
    • Proof and verifier contact details

    How to prepare it

    1. Make a row per exam domain, role or learning activity as applicable. Compare it to the current criteria and record what is supported.
    2. Collect dates, hours where relevant and a description of the work or learning. Link the permitted evidence and flag overlap, missing verification or possible waiver.
    3. Review the package against the issuer’s current instructions. Obtain any confirmations and submit only through the issuer’s approved form.

    Worked example

    Fictional details. Use the same fields with evidence from your work.

    Domain or activity
    Network security, access control and segmentation
    Dates and effort
    Oct 2026, four hours of structured lab practice
    Evidence
    Lab notes and attendance record
    Verifier or issuer rule
    Training provider. Verify activity qualifies for credit before claiming it.
    Status
    Ready for review, credit pending

    Check before handing it over

    A reviewer can assess eligibility or learning credit from the activity, dates and source records.

    Use the worksheet to assemble an application or renewal. File the issuer’s confirmation separately.

    Study planSpreadsheet

    Gather first

    • Current issuer exam blueprint
    • Timed baseline and error log
    • Weekly time available and exam goal

    How to prepare it

    1. List the blueprint objectives and score your confidence using a timed baseline or hands-on task. Use mistakes to pick the first topics to work on.
    2. Schedule short sessions with a measurable output such as a solved lab, recall quiz or explanation to a peer. Include mixed practice and revisit difficult topics.
    3. Re-test after each block and record why errors occurred. Adjust the next week and book the exam when you can demonstrate readiness against the full blueprint.

    Worked example

    Fictional details. Use the same fields with evidence from your work.

    Topic
    Routing and switching, VLAN and trunk behavior
    Baseline
    Could diagram VLANs, missed an allowed VLAN in the lab.
    Week and practice
    Week 2. Build two switches and diagnose the missing VLAN.
    Success check
    Explain the packet path and resolve the fault without notes.
    Result and next action
    Restored connectivity in 9 minutes. Repeat with native VLAN mismatch.

    Check before handing it over

    Each study block has a specific skill, a way to test it and a recorded result.

    Use the completed record to pick what to revisit. Verify the current exam code before booking.

  2. 02

    Practice decisions and explain them aloud

    Who Candidate + study partner When During preparation

    Work through access, network, operations and response scenarios. Write why you chose the action and repeat missed cases.

    What to produce

    Practice resultsSpreadsheet

    Gather first

    • Current issuer exam blueprint
    • Timed baseline and error log
    • Weekly time available and exam goal

    How to prepare it

    1. List the blueprint objectives and score your confidence using a timed baseline or hands-on task. Use mistakes to pick the first topics to work on.
    2. Schedule short sessions with a measurable output such as a solved lab, recall quiz or explanation to a peer. Include mixed practice and revisit difficult topics.
    3. Re-test after each block and record why errors occurred. Adjust the next week and book the exam when you can demonstrate readiness against the full blueprint.

    Worked example

    Fictional details. Use the same fields with evidence from your work.

    Topic
    Routing and switching, VLAN and trunk behavior
    Baseline
    Could diagram VLANs, missed an allowed VLAN in the lab.
    Week and practice
    Week 2. Build two switches and diagnose the missing VLAN.
    Success check
    Explain the packet path and resolve the fault without notes.
    Result and next action
    Restored connectivity in 9 minutes. Repeat with native VLAN mismatch.

    Check before handing it over

    Each study block has a specific skill, a way to test it and a recorded result.

    Use the completed record to pick what to revisit. Verify the current exam code before booking.

    Review listSpreadsheet

    Gather first

    • Current issuer exam blueprint
    • Timed baseline and error log
    • Weekly time available and exam goal

    How to prepare it

    1. List the blueprint objectives and score your confidence using a timed baseline or hands-on task. Use mistakes to pick the first topics to work on.
    2. Schedule short sessions with a measurable output such as a solved lab, recall quiz or explanation to a peer. Include mixed practice and revisit difficult topics.
    3. Re-test after each block and record why errors occurred. Adjust the next week and book the exam when you can demonstrate readiness against the full blueprint.

    Worked example

    Fictional details. Use the same fields with evidence from your work.

    Topic
    Routing and switching, VLAN and trunk behavior
    Baseline
    Could diagram VLANs, missed an allowed VLAN in the lab.
    Week and practice
    Week 2. Build two switches and diagnose the missing VLAN.
    Success check
    Explain the packet path and resolve the fault without notes.
    Result and next action
    Restored connectivity in 9 minutes. Repeat with native VLAN mismatch.

    Check before handing it over

    Each study block has a specific skill, a way to test it and a recorded result.

    Use the completed record to pick what to revisit. Verify the current exam code before booking.

  3. 03

    Book, sit and complete certification

    Who Candidate + exam provider When When ready and after passing

    Confirm delivery, identification and exam rules. Complete ISC2’s post-exam steps and verify the issued credential.

    What to produce

    Exam bookingIssuer document

    Gather first

    • Correct portal or issuer contact
    • Approved scope and submission record
    • File access and sharing requirements

    How to prepare it

    1. Confirm which issuer or portal supplies this record and who can retrieve it. Gather the submission reference, holder name, scope and expected date.
    2. When the document arrives, verify recipient, scope, dates, version, conditions and any required verification link. Escalate discrepancies to the issuer.
    3. Save the original in the approved location. Record renewal or response actions and limit distribution to authorized recipients.

    Worked example

    Fictional details. Use the same fields with evidence from your work.

    Document expected
    Issuer’s final decision or confirmation
    Reference
    Official portal or case ID
    Received and verified by
    Compliance coordinator, 2026-11-10
    Scope and conditions
    Matches the agreed service boundary and version. Follow-up recorded separately.
    Location and access
    Restricted evidence folder, named reviewers only

    Check before handing it over

    The original can be traced to the issuer and its scope and date match the engagement or application.

    Send the verified record or approved summary to decision makers. The download is a tracking sheet for the original document.

    Score reportIssuer document

    Gather first

    • Correct portal or issuer contact
    • Approved scope and submission record
    • File access and sharing requirements

    How to prepare it

    1. Confirm which issuer or portal supplies this record and who can retrieve it. Gather the submission reference, holder name, scope and expected date.
    2. When the document arrives, verify recipient, scope, dates, version, conditions and any required verification link. Escalate discrepancies to the issuer.
    3. Save the original in the approved location. Record renewal or response actions and limit distribution to authorized recipients.

    Worked example

    Fictional details. Use the same fields with evidence from your work.

    Document expected
    Issuer’s final decision or confirmation
    Reference
    Official portal or case ID
    Received and verified by
    Compliance coordinator, 2026-11-10
    Scope and conditions
    Matches the agreed service boundary and version. Follow-up recorded separately.
    Location and access
    Restricted evidence folder, named reviewers only

    Check before handing it over

    The original can be traced to the issuer and its scope and date match the engagement or application.

    Send the verified record or approved summary to decision makers. The download is a tracking sheet for the original document.

    Credential recordIssuer document

    Gather first

    • Correct portal or issuer contact
    • Approved scope and submission record
    • File access and sharing requirements

    How to prepare it

    1. Confirm which issuer or portal supplies this record and who can retrieve it. Gather the submission reference, holder name, scope and expected date.
    2. When the document arrives, verify recipient, scope, dates, version, conditions and any required verification link. Escalate discrepancies to the issuer.
    3. Save the original in the approved location. Record renewal or response actions and limit distribution to authorized recipients.

    Worked example

    Fictional details. Use the same fields with evidence from your work.

    Document expected
    Issuer’s final decision or confirmation
    Reference
    Official portal or case ID
    Received and verified by
    Compliance coordinator, 2026-11-10
    Scope and conditions
    Matches the agreed service boundary and version. Follow-up recorded separately.
    Location and access
    Restricted evidence folder, named reviewers only

    Check before handing it over

    The original can be traced to the issuer and its scope and date match the engagement or application.

    Send the verified record or approved summary to decision makers. The download is a tracking sheet for the original document.

  4. 04

    Record renewal obligations

    Who Credential holder When After the credential is issued

    Check current membership or maintenance fees and continuing education. Set reminders and retain supporting records.

    What to produce

    Continuing education recordSpreadsheet

    Gather first

    • Issuer’s current blueprint, experience or renewal rules
    • Real role history or completed activities
    • Proof and verifier contact details

    How to prepare it

    1. Make a row per exam domain, role or learning activity as applicable. Compare it to the current criteria and record what is supported.
    2. Collect dates, hours where relevant and a description of the work or learning. Link the permitted evidence and flag overlap, missing verification or possible waiver.
    3. Review the package against the issuer’s current instructions. Obtain any confirmations and submit only through the issuer’s approved form.

    Worked example

    Fictional details. Use the same fields with evidence from your work.

    Domain or activity
    Network security, access control and segmentation
    Dates and effort
    Oct 2026, four hours of structured lab practice
    Evidence
    Lab notes and attendance record
    Verifier or issuer rule
    Training provider. Verify activity qualifies for credit before claiming it.
    Status
    Ready for review, credit pending

    Check before handing it over

    A reviewer can assess eligibility or learning credit from the activity, dates and source records.

    Use the worksheet to assemble an application or renewal. File the issuer’s confirmation separately.

    Renewal reminderSpreadsheet

    Gather first

    • Current obligations, expiry dates or audit window
    • Delivery dependencies and owner availability
    • Official rules or engagement confirmation

    How to prepare it

    1. Separate official due dates, trigger-based clocks and team target dates. Write down the event or rule that starts each clock.
    2. Work backward from each milestone. Include lead time for review and submission, and name the owner and backup.
    3. Cross-check the dates with the source or reviewer and make reminders actionable. Record the next verification point for changing rules.

    Worked example

    Fictional details. Use the same fields with evidence from your work.

    Milestone
    Quarterly access review approved
    Date and kind
    2026-12-18, internal target
    Trigger or source
    Internal access control schedule v3
    Prerequisite
    Access export by 2026-12-09
    Owner and reminder
    IAM lead, remind one week before
    Status
    Scheduled

    Check before handing it over

    Every external deadline links to a real source. Planning targets are visibly marked.

    Add approved dates to the team calendar and share them with the people scheduled to deliver or review.

PRIMARY REFERENCES

Official sources

How we build these guides

Keyboard shortcuts

⌘K or /
Search everything
?
This list
g h
Home
g l
Guide library
g f
Find my path
g t
Templates
g p
Playbooks
g w
My workspace
g d
Deadline calendar
g c
Regulatory changes